Product Description
1. Product introduction:K-11 waterproof slurry (acrylic acid copolymer emulsion cement-based waterproof slurry) is a waterproof material based on alkali-resistant synthetic modified cement. K-11 waterproof slurry is prepared from imported and domestic raw materials and is synthesized series of products produced. This product is easy to construct and operate, and its performance is superior to similar products.
2. Main features 1. It can be constructed on wet base surfaces, and the waterproof layer has high mechanical strength and good wear resistance. 2. The coating can prevent moisture and salt pollution and inhibit the growth of mold. 3. The concrete can still remain breathable. Since this product is cement-based, ceramic tiles, mosaics, etc. can be directly laid on the waterproof layer. 4. Resist high hydrostatic pressure and have the waterproof function of negative water surface. 5. This product has two appearances: white and gray.
3. Scope of application: 1. Used for indoor and outdoor cement concrete building structures, prefabricated concrete structures, cement plasters and brick walls and other base surfaces. 2. Underground parking lanes, underground tunnels, water supply and drainage pipes, floor walls and floors. 3. This product is non-toxic and harmless and can be directly used in drinking water reservoirs, swimming pools, fish ponds, etc. 4. This product is also suitable for various waterproofing projects on the front or back water surface.
4. Construction requirements: 1. The base must be clean, solid, flat, dry, ash-free, and sand-free. 2. Pour the liquid into the prepared solvent in proportion, then add the powder into the liquid in proportion and stir thoroughly until the liquid and powder are dissolved. 3. Use a roller, shotcrete machine or brush to evenly roll or spray the mixed slurry onto the cement base surface. It is appropriate to apply the coating 2-3 times; the thickness of the coating shall be constructed according to the design requirements. 4. The order of coating is about 4 hours after the first coat. When the coating is completely dry, apply the second coat at a vertical 90-degree angle, and so on. 5. After the construction is completed, it is prohibited to step on it within 24 hours. After it is completely dry, other covering layers (such as plastering, tiling, mosaic, etc.) can be applied.
5. Technical indicators: Implementation standard: JC/T894-2013.
6. Packaging, storage and transportation: Liquid materials must be stored in a cool place above 5ºC, and powder materials should be stored in a dry place. Pay attention to moisture, sun and rain protection. The shelf life of this product is six months.
7. Product dosage: The dosage for one square meter with a thickness of 3 mm is 3 kg or 3.5 kg.
){kind=link}
){kind=link}