Product Description
Tile-free waterproofing solution (to treat leaks in bathrooms and kitchens without smashing floor tiles) consists of a penetrating component (colorless or light yellow and transparent) and a crystalline component (green and transparent, slightly precipitated). The main function of the penetrating component is to clean the channels of cement mortar so that the surface of the mortar is clean and free of impurities, which is conducive to the passage of crystalline components and reacts with the hydration products of cement. Crystalline component: This component forms colloids and crystals with the hydration products of cement, blocking the capillary pores or channels of mortar or concrete, thereby achieving waterproofing purposes.
This product has a secondary repair function, that is, after using this product, if cracks or holes leak again in other places (a new section occurs), the product will quickly penetrate into the new section and react with the hydrate of the cement. , and generate colloid or crystal, and automatically repair the leakage for the second time, which is the biggest advantage of this product. Smash-free ceramic tile waterproofing product chemically reacts with the cement hydration products under the floor tiles to achieve waterproofing purposes. Please master the above principles during construction and try to make the product penetrate under the floor tiles as much as possible to generate more substances to block the leakage channels to achieve the best waterproof effect.
Construction process
1. Cut the floor tiles with a knife (to facilitate the penetration of waterproofing agent) and clean up the garbage.
2. Block the floor drain.
3. Dilute the penetrating component with 3-4 times of water, pour it on the floor, and use a sweeper to sweep from low to high (making the product leak into the floor tiles through the cracks of the bricks) until all the product leaks into the floor. .
4. After 2-5 hours, dilute the crystallized part with 3-5 times of clean water, pour it on the floor, and sweep it from low to high (it will react with cement hydration products after penetration to form water-insoluble colloid or crystal to achieve waterproofing purpose) until no more seepage.
5. Clean up in time and the construction is completed.
6. After the construction is completed, try not to splash water on the floor tiles, but washing and going to the toilet will not be affected.
7. After seven days, the water storage test can be done. Dosage ratio table of special waterproofing agent for bathroom and kitchen. Components: Multiple dilution of project with water (original solution) Time penetration component (colorless and transparent) 3-4 times 0.5kg/square 2-5 hours Crystalline component (green liquid slightly (With precipitation) 3-5 times 0.5kg/square 1-3 hours
){kind=link}
){kind=link}