Exterior Wall Roof Basement Leak Repair Water-Based 951 One-Component Waterproof Material 911 Oil-Based Polyurethane Waterproof Coating

1. Product introduction: the one-component polyurethane waterproof coating is a kind of one-component reactive flexible waterproof coating, which is made from imported raw materials and additives by macromolecule synthetic reaction process, the material has the advantages of good technical performance, simple use and convenient construction for customers.
2.Main features (implementation standard: GB/T19250-2013) 
(1)In accordance with the testing standards;
(2)The utility model can be directly constructed on the base surface of ≤9% moisture content or various dry materials;
(3)Single component construction is simple and convenient;
(4)High solid content, less dosage per unit area
(5)Good weather resistance, acid resistance and alkali resistance
(6)Has a unique water resistance, is the first choice for underground waterproofing materials;
(7)The resistance to low temperature was up to 40 ° C, and the resistance to high temperature was up to 140 ° C
(8)Can Be prepared into a variety of color paint.
3.Product application scope
One-component polyurethane waterproof coating can be directly applied on dry masonry, mortar, concrete, metal, various insulation layers and various waterproof layers, for both old and new buildings and structures (such as large-scale underground works of industrial venues, subways, tunnels, bridges, reservoirs, pools, etc.) can be used.
4.Construction Technology
(1)Method:Brush, roll coating, spraying can be; direct coating brush again (referred to as direct coating method) ; 2-4 coating a cloth: pipe mouth, corner must use cloth method.
(2)Process:Clean up the base dust; brush bottom coating; to be the bottom coating dry, brush two to four coating in turn (each coating interval time not less than 6h) ; when cloth. In the second coating brush is not dry in the case of coverage, such as coating completely dry after coverage. Then brush the top of two coating; treatment of plastic pipe mouth, the first to wear the pipe wall, and then brush coating waterproof paint; after a brush, at least 24 hours to hand in; before delivery can not walk on the coating or stacking objects.
5.Points to note:
No outdoor work on rainy days; Not suitable for construction below 5 ° C; 
 Not suitable for construction in particularly humid environment; 
Under the environment of poor ventilation brush interval time accordingly extended.